Saturday, November 7, 2009
Colligative properties
Colligative properties
From Wikipedia, the free encyclopedia
| This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (March 2008) |
Colligative properties are properties of solutions that depend on the number of molecules in a given volume of solvent and not on the properties (e.g. size or mass) of the molecules.[1] Colligative properties include: lowering of vapor pressure; elevation of boiling point; depression of freezing point and osmotic pressure. Measurements of these properties for a dilute aqueous solution of a non-ionized solute such as urea orglucose can lead to accurate determinations of relative molecular masses. Alternatively, measurements for ionized solutes can lead to an estimation of the percentage of ionization taking place.
Contents[hide] |
[edit]Vapor pressure
The relationship between the lowering of vapor pressure and concentration is given by Raoult's law, which states that:
- The vapor pressure of an ideal solution is dependent on the vapor pressure of each chemical component and the mole fraction of the component present in the solution. (For details, see the article on Raoult's law.)
[edit]Boiling point and freezing point
Both the boiling point elevation and the freezing point depression are proportional to the lowering of vapor pressure in a dilute solution
[edit]Boiling point elevation
- Boiling Pointtotal = Boiling Pointsolvent + ΔTb
where
- ΔTb = molality * Kb * i, (Kb = ebullioscopic constant, which is 0.51°C kg/mol for the boiling point of water; i = Van 't Hoff factor)
Since boiling point is achieved in the establishment of equilibrium between liquid and gas phase, that is, the number of molecules entering the molecules of a system equals the number of vapor molecules leaving the system, then an addition of solute would cause to hinder some of the molecules to leave the system because they are covering in the surface. To compensate for this and re-attain the equilibrium, boiling point therefore is achieved at higher temperature.
[edit]Freezing point depression
Freezing Pointsolution = Freezing Pointsolvent - ΔTf
where :ΔTf = molality * Kf * i, (Kf = cryoscopic constant, which is -1.86°C kg/mol for the freezing point of water, this is very fine; i = Van 't Hoff factor)
Freezing point, or the equilibrium between a liquid and solid phase is generally lowered in the presence of a solute compared to a pure solvent. The solute particles cannot enter the solid phase, hence, less molecules participate in the equilibrium. Again, re-establishment of equilibrium is achieved at a lower temperature at which the rate of freezing becomes equal at the rate of solidifying.
[edit]Osmotic pressure
Two laws governing the osmotic pressure of a dilute solution were discovered by the German botanist W. F. P. Pfeffer and the Dutch chemist J. H. van’t Hoff:
- The osmotic pressure of a dilute solution at constant temperature is directly proportional to its concentration.
- The osmotic pressure of a solution is directly proportional to its absolute temperature.
These are analogous to Boyle's law and Charles's Law for gases. Similarly, the combined ideal gas law, PV = nRT, has an analog for ideal solutions:
- πV = nRTi
where: π = osmotic pressure; V is the volume; T is absolute temperature; n is the number of moles of solute; R = 8.3145 J K-1 mol-1, the molargas constant; i = Van 't Hoff factor.
Raoult's law
Raoult's law
From Wikipedia, the free encyclopedia
Established by François-Marie Raoult, Raoult's law states:
- the vapor pressure of an ideal solution is dependent on the vapor pressure of each chemical component and the mole fraction of the component present in the solution.[1]
Once the components in the solution have reached equilibrium, the total vapor pressure pof the solution is:
and the individual vapor pressure for each component is
where
- p*i is the vapor pressure of the pure component
- xi is the mole fraction of the component in solution
Consequently, as the number of components in a solution increases, the individual vapor pressures decrease, since the mole fraction of each component decreases with each additional component. If a pure solute which has zero vapor pressure (it will not evaporate) is dissolved in a solvent, the vapor pressure of the final solution will be lower than that of the pure solvent.
This law is strictly valid only under the assumption that the chemical interactions betweenthe two liquids is equal to the bonding within the liquids: the conditions of an ideal solution. Therefore, comparing actual measured vapor pressures to predicted values from Raoult's law allows information about the relative strength of bonding between liquids to be obtained. If the measured value of vapor pressure is less than the predicted value, fewer molecules have left the solution than expected. This is put down to the strength of bonding between the liquids being greater than the bonding within the individual liquids, so fewer molecules have enough energy to leave the solution. Conversely, if the vapor pressure is greater than the predicted value more molecules have left the solution than expected, due to the bonding between the liquids being less strong than the bonding within each.
The vapor pressure and composition in equilibrium with a solution can yield valuable information regarding the thermodynamic properties of the liquids involved. Raoult’s law relates the vapor pressure of components to the composition of the solution. The law assumes ideal behavior. It gives a simple picture of the situation just as the ideal gas law does. The ideal gas law is very useful as a limiting law. As the interactive forces between molecules and the volume of the molecules approaches zero, so the behavior of gases approach the behavior of the ideal gas.
Raoult’s law is similar in that it assumes that the physical properties of the components are identical. The more similar the components are, the more their behavior approaches that described by Raoult’s law. For example, if the two components differ only in isotopic content, then the vapor pressure of each component will be equal to the vapor pressure of the pure substance P0 times the mole fraction in the solution. This is Raoult’s law.
Using the example of a solution of two liquids, A and B, if no other gases are present, then the total vapor pressure p above the solution is equal to the weighted sum of the "pure" vapor pressures of the two components, pA and pB. Thus the total pressure above solution of A and B would be
Contents[hide] |
[edit]Derivation
We define an ideal solution as a solution for which the chemical potential of component i is:
,
where µ*i is the chemical potential of pure i.
If the system is at equilibrium, then the chemical potential of the component i must be the same in the liquid solution and in the vapor above it. That is,
Assuming the liquid is an ideal solution, and using the formula for the chemical potential of a gas, gives:
where ƒi is the fugacity of the vapor of i.
The corresponding equation for pure i in equilibrium with its (pure) vapor is:
where * indicates the pure component.
Subtracting both equations gives us
which re-arranges to
The fugacities can be replaced by simple pressures if the vapor of the solution behaves ideally i.e.
which is Raoult’s Law.
[edit]Ideal mixing
An ideal solution can be said to follow Raoult's Law but it must be kept in mind that in the strict sense ideal solutions do not exist. The fact that the vapor is taken to be ideal is the least of our worries. Interactions between gas molecules are typically quite small especially if the vapor pressures are low. The interactions in a liquid however are very strong. For a solution to be ideal we must assume that it does not matter whether a molecule A has another A as neighbor or a B molecule. This is only approximately true if the two species are almost identical chemically. We can see that from considering the Gibbs free energy change of mixing:
This is always negative, so mixing is spontaneous. However the expression is, apart from a factor –T, equal to the entropy of mixing. This leaves no room at all for an enthalpy effect and implies that ΔmixH must be equal to zero and this can only be if the interactions U between the molecules are indifferent.
It can be shown using the Gibbs–Duhem equation that if Raoult's law holds over the entire concentration range x = 0–1 in a binary solution then, for the second component, the same must also hold.
If the deviations from ideality are not too strong, Raoult's law will still be valid in a narrow concentration range when approaching x = 1 for the majority phase (the solvent). The solute will also show a linear limiting law but with a different coefficient. This law is known as Henry's law.
The presence of these limited linear regimes has been experimentally verified in a great number of cases.
In a perfectly ideal system, where ideal liquid and ideal vapor are assumed, a very useful equation emerges if Raoult's law is combined withDalton's Law.
[edit]Non-ideal mixing
Raoult's Law may be adapted to non-ideal solutions by incorporating two factors that will account for the interactions between molecules of different substances. The first factor is a correction for gas non-ideality, or deviations from the ideal-gas law. It is called the fugacity coefficient (φ). The second, the activity coefficient (γ), is a correction for interactions in the liquid phase between the different molecules.
This modified or extended Raoult's law is then written:
[edit]Real solutions
Many pairs of liquids are present in which there is no uniformity of attractive forces i.e. the adhesive & cohesive forces of attraction are not uniform between the two liquids, so that they show deviation from the raoult's law which is applied only to ideal solutions.
[edit]Negative deviation
When adhesive forces between molecules of A & B are greater than the cohesive forces between A & A or B & B, then the vapor pressure of the solution is less than the expected vapor pressure from Raoult's law. This is called as negative deviation from Raoult's law. These cohesive forces are lessened not only by dilution but also attraction between two molecules through formation ofhydrogen bonds. This will further reduce the tendency of A and B to escape.
For example, chloroform & acetone show such an attraction by formation of an H-bond.
[edit]Positive deviation
When the cohesive forces between like molecules are greater than the adhesive forces, the dissimilarities of polarity or internal pressure will lead both components to escape solution more easily. Therefore, the vapor pressure will be greater than the expected from the Raoult's law, showing positive deviation. If the deviation is large, then the vapor pressure curve will show a maximum at a particular composition, e.g. benzene & ethyl alcohol, carbon disulfide & acetone, chloroform & ethanol.
Lowering of V.P.
Click here to review vapor pressure of pure liquids and solids.
The Macroscopic View
When a solute is added to a solvent, the vapor pressure of the solvent (above the resulting solution) is lower than the vapor pressure above the pure solvent.
The vapor pressure of the solvent above a solution changes as the concentration of the solute in the solution changes (but it does not depend on the identity of either the solvent or the solute(s) particles (kind, size or charge) in the solution).
Non-Volatile Solutes
Experimentally, we know that the vapor pressure of the solvent above a solution containing a non-volatile solute (i.e., a solute that does not have a vapor pressure of its own) is directly proportional to the mole fraction of solvent in the solution. This behavior is summed up in Raoult's Law:
where:
Psolvent is the vapor pressure of the solvent above the solution,
Xsolvent is the mole fraction of the solvent in the solution, and
Posolvent is the vapor pressure of the pure solvent.
Note that
- when Xsolvent = 1 (pure solvent), Psolvent = Posolvent, and
- when Xsolvent <>Psolvent < Posolvent (i.e., the vapor pressure of the solvent above the solution is lower than the vapor pressure above the pure solvent).
The following graph shows the vapor pressure for water (solvent) at 90oC as a function of mole fraction of water in several solutions containing sucrose (a non-volatile solute). Note that the vapor pressure of water decreases as the concentration of sucrose increases.
Volatile Solutes
A volatile solute (i.e., a solute that has a vapor pressure of its own) will contribute to the vapor pressure above a solution in which it is dissolved. The vapor pressure above a solution containing a volatile solute (or solutes) is equal to the sum of the vapor pressures of the solvent and each of the volatile solutes.
The Microscopic View
The figure below shows a microscopic view of the surface of pure water. Note the interface between liquid water (below) and water vapor (above).
Non-Volatile Solutes
The figures below illustrate how the vapor pressure of water is affected by the addition of the non-volatile solute, NaCl.
Note that:
- there are fewer water molecules in the vapor (i.e., lower vapor pressure) above the NaCl solution than in the vapor above pure water, and
- there are no sodium ions or chloride ions in the vapor above the NaCl solution.
| Pure water - microscopic view. | 1.0 M NaCl solution - microscopic view. Note that the ionic solid, NaCl, produces Na+ ions (blue) and Cl- ions (green) when dissolved in water. |
Volatile Solutes
The figures below illustrate how the vapor pressure of liquid xenon is affected by the addition of the volatile solute, liquid krypton.
Note that:
- there are fewer xenon atoms in the vapor (i.e., lower vapor pressure) above the solution than in the vapor above pure liquid xenon, and
- there are krypton atoms in the vapor above the solution (i.e., both krypton and xenon contribute to the vapor pressure above the solution).
| Pure liquid xenon - microscopic view. | Krypton-xenon solution - microscopic view (krypton atoms are shown in blue). |
B.P.elevation
Boiling-point elevation
From Wikipedia, the free encyclopedia
Boiling-point elevation describes the phenomenon that the boiling point of a liquid (a solvent) will be higher when another compound is added, meaning that a solution has a higher boiling point than a pure solvent. This happens whenever a non-volatile solute, such as a salt, is added to a pure solvent, such as water. The boiling point can be measured accurately using an ebullioscope.
Contents[hide] |
[edit]Explanation
The boiling point elevation is a colligative property, which means that it is dependent on the presence of dissolved particles and their number, but not their identity. It is an effect of the dilution of the solvent in the presence of a solute. It is a phenomenon that happens for all solutes in all solutions, even in ideal solutions, and does not depend on any specific solute-solvent interactions. The boiling point elevation happens both when the solute is an electrolyte, such as various salts, and a nonelectrolyte. In thermodynamic terms, the origin of the boiling point elevation is entropic and can be explained in terms of the vapor pressure or chemical potential of the solvent. In both cases, the explanation depends on the fact that many solutes are only present in the liquid phase and do not enter into the gas phase (except at extremely high temperatures).
Put in vapor pressure terms, a liquid boils at the temperature when its vapor pressure equals the surrounding pressure. For the solvent, the presence of the solute decreases its vapor pressure by dilution. A non-volatile solute has a vapor pressure of zero, so the vapor pressure of the solution is the same as the vapor pressure of the solvent. Thus, a higher temperature is needed for the vapor pressure to reach the surrounding pressure, and the boiling point is elevated.
Put in chemical potential terms, at the boiling point, the liquid phase and the gas (or vapor) phase have the same chemical potential (or vapor pressure) meaning that they are energetically equivalent. The chemical potential is dependent on the temperature, and at other temperatures either the liquid or the gas phase has a lower chemical potential and is more energetically favourable than the other phase. This means that when a non-volatile solute is added, the chemical potential of the solvent in the liquid phase is decreased by dilution, but the chemical potential of the solvent in the gas phase is not affected. This means in turn that the equilibrium between the liquid and gas phase is established at another temperature for a solution than a pure liquid, i.e., the boiling point is elevated.[1]
The phenomenon of freezing-point depression is analogous to boiling point elevation. However, the magnitude of the freezing point depression is larger than the boiling point elevation for the same solvent and the same concentration of a solute. Because of these two phenomena, the liquid range of a solvent is increased in the presence of a solute.
[edit]Calculations
The extent of boiling-point elevation can be calculated by applying Clausius-Clapeyron relation and Raoult's law together with the assumption of the non-volatility of the solute. The result is that in dilute ideal solutions, the extent of boiling-point elevation is directly proportional to the molalconcentration of the solution according to the equation:[1]
ΔTb = Kb · mB
where
- ΔTb, the boiling point elevation, is defined as Tb (solution) - Tb (pure solvent).
- Kb, the ebullioscopic constant, which is dependent on the properties of the solvent. It can be calculated as Kb = RTb2M/ΔHv, where R is thegas constant, and Tb is the boiling temperature of the pure solvent [in K], M is the molar mass of the solvent, and ΔHv is the heat of vaporization per mole of the solvent.
- mB is the molality of the solution, calculated by taking dissociation into account since the boiling point elevation is a colligative property, dependent on the number of particles in solution. This is most easily done by using the van 't Hoff factor i as mB = msolute · i. The factor iaccounts for the number of individual particles (typically ions) formed by a compound in solution. Examples:
- i = 1 for sugar in water
- i = 2 for sodium chloride in water, due to the full dissociation of NaCl into Na+ and Cl-
- i = 3 for calcium chloride in water, due to dissociation of CaCl2 into Ca2+ and 2Cl-
At high concentrations, the above formula is less precise due to nonideality of the solution. If the solute is also volatile, one of the key the assumptions used in deriving the formula is not true, since it derived for solutions of non-volatile solutes in a volatile solvent. In the case of volatile solutes it is more relevant to talk of a mixture of volatile compounds and the effect of the solute on the boiling point must be determined from the phase diagram of the mixture. In such cases, the mixture can sometimes have a boiling point that is lower than either of the pure components; a mixture with a minimum boiling point is a type of azeotrope.
[edit]Ebullioscopic constants
Values of the ebullioscopic constants Kb for selected solvents:[2]
| Compound | Boiling point in °C | Ebullioscopic constant Kb in units of [(K·kg)/mol] or [K/molal] |
|---|---|---|
| Acetic acid | 118.1 | 3.07 |
| Benzene | 80.1 | 2.53 |
| Carbon disulfide | 46.2 | 2.37 |
| Carbon tetrachloride | 76.8 | 4.95 |
| Naphthalene | 217.9 | 5.8 |
| Phenol | 181.75 | 3.04 |
| Water | 100 | 0.512 |
[edit]Uses
Together with the formula above, the boiling-point elevation can in principle be used to measure the degree of dissociation or the molar mass of the solute. This kind of measurement is called ebullioscopy (Greek "boiling-viewing"). However, since superheating is difficult to avoid, preciseΔTb measurements are difficult to carry out,[1] which was partly overcome by the invention of the Beckmann thermometer. Furthermore, the cryoscopic constant that determine freezing-point depression is larger than the ebullioscopic constant, and since the freezing point is often easier to measure with precision, it is more common to use cryoscopy.
A common misuse of the effect of ebullioscopic increase leads to add salt when cooking pasta, only after water has started boiling. The misconception is that otherwise it would take longer for water to boil to elevate the temperature of the water before it boils. However, at the approximate dosage of salting water for cooking (10 g of salt per 1 kg of water, or 1 teaspoon per quart), ebullioscopic increase is approximately 0.17 C (0.31 F), but it is counteracted by the fact that at that concentration salted water absorbs heat faster.
